Description
Polyamido-Amine Epoxy
Penetrating primer/sealer for use on concrete substrates and Pyrocrete Fireproofing products. It performs extremely well in sealing cementitious surfaces and is designed to receive a variety of different generic types of finish coats. Some recommended uses of EP II include the use as a form release agent on plywood or steel forms.
- Exceptional wetting characteristics
- Low stress, highly flexible film
- Very high solids
- Low odor
- User-friendly brush & roller application
- VOC compliant to current AIM regulations
Specification data
| Color | Clear Amber (0910) |
| Gloss Finish | Gloss |
| Primers | Self-priming. May be applied over most generic types of coatings |
| Topcoats | Acrylics, Epoxies, Polyurethanes |
| Dry Temp. Resistance | Continuous: 175°F (79°C) Non-Continuous: 200°F (93°C) |
| Solids Content | By Volume: 98% ± 2% |
| Dry Film Thickness | 1.0 – 2.0 mils (25 – 50 microns) DFT for most applications but can be applied up to 4.0 mils (100 microns) for sealing rough surfaces or shot- blasted concrete. When used as a form release agent, it may be applied up to 10.0 mils (250 microns) wet. |
| VOC Values | Per EPA Method 24: 0.2 lbs/gal (24 g/l) Thinned: 25 oz/gal w/ #76: 1.3 lbs./gal (156 g/l) These are nominal values. |
| Theoretical Coverage Rate | 1572 mil ft2(38.5 m2/l at 25 microns) Allow for loss in mixing and application. Porous and irregular substrates like concrete/fireproofing coverage rates and should be taken into account. |
| Ratio | 1:1 Ratio (A to B) |
Monarch EP II
